C.N.C Machine Keypaid Ki Jankaari


     
CNC-Machine-ke-keypad-ki-basic-jaankaari




Namskaar dosto aaj ki is post me hum CNC machine per lge keypads ke bare me baat krege. CNC Machine me kon se kon se buttons lge hote hai aur Inka kya hota hai. In sab ke bare me me Mai aap Ko details se btauga. Isse pehle age bde aap meri ye pichli post jarur pad le



MC ON :- Machine ki Power On Krne ke liye

MC OFF :- Machine Ki Power OFF krne ke liye

Cycle Start :-  Cycle Start Krne ke liye

CYCLE STOP :-  Chalti Machine Ko beech me Rokne ke liye

EDIT :- Program Me Add  Aur Delete krne ke liye

MEM :-  Machine Ko Automatically Run Keane ke liye

MDI :- Manually Chalane ke liye 

REFERENCES :- Machine Ko Reference krne ke liye

JOG :- Handle Use ke liye/  X,Z Rapid ke liye.

X With HANDLE :- Handle se X Ko uper niche krne keliye

Z With HANDLE :- Handle se Z Ko aage piche krne ke liye

X With RAPID :-  X Ko Rapid Me aage piche krne ke liye


CNC MACHINE KA PROGRAMME KAISE BNATE HAI. BASIC JAANKARI HINDI ME
Z With RAPID :- Z Ko Rapid Me aage piche krne ke liye

REVARSH (SPINDLE MODE) :-  Spindle Ko ulta Ghanem ke liye


FORWARD (SPINDLE MODE) :- Spindle Ko ghumane ke liye 


SPINDLE OVERRID :-  Spindle Ki RPM Ko adjust krne ke liye


FEED OVERRIDE (0-200%) :- X,Z ki Feed Adjust krne ke liye


STOP :-  SPINDL Ko Rokne ke liye
CHUCKING :- Workpiece Ko Clamp krne ke liye


LOW :-  Clamping pressure Low


HIGH :- Clamping Pressure High


CHUCK MODE SELECT :- ID/ OD  Clamp Ko select krne ke liye.


PROGRAM PROTECT :-  Program Ko PROTECT aur Save rakhne ke loye. Jab tak Program PROTECT Mood On rahega koi bhi program me kuch bhi Add ye delete nhi kr skta hai.


LUB. ALARM :- Lubricant Khatam ya Kam hone per 


ALARM :- Machine Ko Problem aane per


M/C LOCK :-  Machine Ko LOCK Krne ke liye


WORK LIGHT :-  Work light on off krne ke liye


INDEX :- TURRET Ko Index krne ke liye


DIRECTION (TURRET) :- TURRET ki Direction Select krne ke liye


COOLANT (ON) :- Coolant On krne ke kiye


COOLANT (OFF) :- Coolant Off krne ke kiye

TOOL MEASURE :- Tool Zero Krne ke liye/ Offset Lene ke liye


SINGLE BLOK :-  Program ki ek ek Line Ko Chalane ke liye


OPTIONAL STOP :- Machine Ko kisi Code per Stop krna .. jaise M00, M02,


SPINDLE GEAR CHANGE :- Spindle ke gear Adjust krne ke liye


TAIL STOCK :- Tail Stock aage piche krne ke liye.

Ram Gupta
Ram Gupta

This is a short biography of the post author. Maecenas nec odio et ante tincidunt tempus donec vitae sapien ut libero venenatis faucibus nullam quis ante maecenas nec odio et ante tincidunt tempus donec.

1 comment: